Version 1.0, effective from 15 November 2026.
This is a convenience translation; the Polish version is binding and prevails in case of discrepancy.
The most important points in a few sentences
- Results in Skalnivo are estimates and are for information only. It is not a measuring instrument.
- Skalnivo calculates what you point at with your finger, based on the scale that you enter yourself. If the drawing, the calibration or the point you indicated is inaccurate, the result will be inaccurate too.
- Always check the dimension yourself before using it for cutting, ordering materials, construction or installation.
- The app does not replace measuring in the field, the design, the designer or the site manager.
Where differences come from – examples
- Poor calibration. You indicated two points and entered "4.00 m", but the actual dimension on the drawing is 3.95 m, or the point landed 2 mm off the edge. All subsequent results will inherit this error. The shorter the calibration segment, the greater the error may be when carried over to longer distances.
- Distorted scan or photo. A drawing photographed at an angle, a wavy sheet, creases, a stretched photocopy, a wide-angle lens. Perspective correction improves the image but does not remove all distortion.
- A drawing "with no scale", rescaled or printed at a different scale. If a printout or PDF has been reduced ("fit to page"), the "1:100" scale on the drawing is no longer true. That is why Skalnivo always asks for calibration on a known dimension instead of guessing the scale.
- Errors in the source file. The drawing may contain outdated, wrong or contradictory dimensions, designer's mistakes, different versions. The app does not assess whether the drawing is correct.
- Limitations in reading files. DWG, DXF and PDF files may contain elements that the app does not support (e.g. references to other files, custom objects, missing fonts, unusual units). These elements may not be displayed or may be displayed incorrectly. The app warns when it detects this, but it cannot always detect this.
- Pointing with a finger and rounding. Touching the screen has limited accuracy, especially at low zoom. Results are displayed rounded.
- Software errors. Despite our efforts, any software may contain errors.
What this means for you
- Before using a result, check it in the field with a suitable tool and compare it with the design documentation.
- Do not base safety decisions (load-bearing capacity, stability, installations, health and life) solely on results from the app.
- If you use results in work for clients, tell them that they are estimates.
- Do not present results as accurate, certified or official measurements.
No warranty and liability
The app and the browser tool are provided free of charge "as is". To the fullest extent permitted by law, Samael does not guarantee the accuracy, precision or correctness of dimensions, scale, calibration or reading of files, and is not liable for damage resulting from relying on results without verification (e.g. costs of materials, rework, delays, lost profits). This does not limit liability that the law does not allow to be excluded, in particular for damage caused intentionally and for personal injury, nor consumers' rights arising from mandatory provisions. Full rules are in the App Terms (§ 8) and the Website Terms (§ 6).
Contact: support@skalnivo.com.