Frequently asked questions
Each answer stands on its own and can be read without the rest of the page. Is your question not answered here? Write to us.
General
What is Skalnivo for?
Skalnivo is an Android and iOS app for measuring on flat 2D technical drawings. After you calibrate it with two points on a known dimension, it measures distance, polyline length, area, perimeter and circles. It opens PDF, DWG, DXF and images, as well as photos of paper plans after perspective correction.
How much does Skalnivo cost?
Version 1.0 is free: no ads, no in-app purchases and no limit on the number of measurements. You do not need an account to use the mobile app. The browser tool requires a free account, and it is also available at no charge. There are no charges for the number of measurements or for saving measurements in the app.
Who publishes Skalnivo?
The publisher is Samael Sp. z o.o., based in Tarnów, Poland (NIP PL9930654255, KRS 0000503734). Full company details are on the Company details page, and you can reach us through the contact form or at support@skalnivo.com. The About Skalnivo page collects the facts about the product and a press kit.
Which devices does Skalnivo run on?
On Android phones and tablets (Google Play) and on iOS (App Store). For signed-in users there is also a browser tool on a computer. The interface is available in Polish, English, German and Dutch, and you change the language in Profile without restarting the app.
Can I measure a room with the camera or in AR?
No. Skalnivo works only on existing, flat 2D drawings and uses neither LiDAR nor AR. The camera is used only to photograph a paper drawing, which the app straightens and calibrates. Measuring a real interior calls for an app from a different category. Measuring a drawing and measuring a room are different tasks, so the choice depends on whether the drawing already exists.
File formats
Which file formats does Skalnivo open?
PDF (including multi-page), DWG, DXF, JPG/JPEG, PNG and WebP. All are opened read-only: the original is never changed, and measurements and calibrations are saved in a separate overlay. The import limit is 400 MB per file. The Formats page gives the details. DXF and DWG are for CAD drawings, while image formats are for photos and scans.
Which DWG versions does the app support?
DWG reading works for versions R14 to R2018 and newer (checked on AutoCAD test files). R13 has reading code but had no test file. R12 and older versions, and encrypted files, end with a message. Only model space is drawn.
What is the difference between DWG and DXF?
DWG is the binary working format of CAD programs, while DXF is an exchange format with a documented structure, saved as text or binary data. Both can hold the same drawing, layers and blocks. In Skalnivo both open read-only, with the same limitations.
Does a multi-page PDF have a single scale?
Not necessarily. PDF pages can differ in size and scale, so calibration is stored separately for each page. Changing page does not carry the scale over unless you decide so. This keeps a measurement on a section from being converted with the scale of a floor plan. It is worth calibrating every page you use for measuring.
Does the app change my file?
No. PDF, DWG, DXF and image files are opened read-only. Measurements and calibrations go into a separate overlay on the device. Removing an entry from the Skalnivo Library does not delete the original file from the device, and the app does not convert formats. This means you can safely pass the same file on.
Accuracy and calibration
How does calibration work?
You pick two points on a segment of known length, for example on a labelled dimension of 4.00 m, and enter that value with its unit. From then on, every distance on that page is calculated proportionally. Calibration is stored separately for a PDF page or a scan; a CAD file with recorded units is calibrated automatically.
How do I calibrate a sheet with several scales?
Choose the Region (view at another scale) mode in calibration, tap two corners of the view and then a segment of known length. Each view on the sheet, for example a detail, has its own calibration. When a measurement enters an area with another scale or leaves the area, the app warns you and lets you choose the calibration in Calibration used.
How do I check a calibration with a second dimension?
After calibrating, tap Check with a 2nd dimension and place another labelled dimension in the same view. The app shows the deviation as a percentage. Above 1% the page status is Needs checking, because the cause may be a rounded label, a short segment or another scale in that view. Further dimensions refine the common scale.
How accurate are the measurements?
Calculations run at full precision, but the result depends on the drawing, the calibration segment and where you place the points. In an internal test on real PDFs, the median deviation from the labels was 0.22% and the maximum 2.53%. It is a supporting tool, so confirm critical dimensions on site.
Which segment should I calibrate on?
Choose a long, straight segment with a clearly written dimension, in the part of the drawing where you will be measuring. The longer the segment, the smaller the relative error, because the error in placing a point is spread over a greater length. Then check the result against a second known dimension. Avoid short segments and chain dimensions with rounded values.
What if the drawing has no dimensions at all?
The scale can only be set from a length you know. You can use an element of known size, such as a standard door, as a rough reference, or measure one segment on site and calibrate on that. Treat such a result as an estimate. In both cases, note that the scale is approximate.
Why does the result differ from the dimension on the drawing?
The most common causes are a short or imprecise calibration segment, a printout or PDF at a different scale from the stated one, a distorted photo and a rounded or incorrect label. Check the result with Check with a 2nd dimension, using a dimension from the same view. On sheets with several scales, calibrate each view separately as an Area.
Can I trust a 1:100 scale note in a PDF?
Not always. The stated scale applies to the original sheet. If the PDF was made from a printout that was reduced or fitted to the page, the scale no longer holds, and the file does not record that change. That is why Skalnivo does not guess the scale and asks you to calibrate on a known dimension. A scale shown in a table may be useful as a guide, but not as data for calculations.
Privacy
Are my drawings uploaded to a server?
No. Files and measurements stay on the device, and the app has no cloud or file storage. In the browser tool, files are processed locally in the tab. Only what you send yourself reaches the server, for example the text of a report, and an attachment only with your consent.
Does Skalnivo work without internet?
Yes. Opening files, scanning, calibration and measuring all work offline. You need internet only to sign in, send a report and use the browser tool. Version 1.0 contains no ads or ad networks, so it does not download content in the background. The other functions also do not require a connection, even in places without signal, such as a basement or construction site.
Does the app use the camera in the background?
No. The camera starts only when you enter the scanner, with your permission, and is released when you leave the scanning screen. The app has no background services and no location access. Photos and scans stay on the device. Camera permission can be revoked at any time in system settings, and measurements on files will continue to work.
Where are my measurements saved?
Locally on the device, in the app's database, separately from the source files. There is no syncing between devices and no cloud copy. Local data can be deleted in the app, and it disappears with the app when you uninstall it. The Privacy policy gives the details. Backup depends on the phone's system settings, not on Skalnivo.
Account
Do I need an account to use Skalnivo?
No. Opening files, scanning, calibration and measuring all work in guest mode, without signing in. Signing in with Google or Apple is optional and not needed for measuring. An account is required only in the browser tool, where you can create one with an email address. Not having an account does not limit the number of files or measurements.
How do I delete my account and data?
A signed-in user can delete the account on the Account deletion page or in the account area on skalnivo.com. Local data in the app, such as the library and measurements, stays on the device until you delete it or uninstall the app. The Account deletion page gives the details. Deleting the account does not affect files stored on the device.
Do measurements sync between devices?
No. Skalnivo has no cloud sync, and measurements and the library are stored only on the device where you created them. If you need the same drawing on a second device, open the source file there as well and calibrate again. You should therefore save your own measurement notes separately.
Browser version
How do I open the browser tool?
Sign in at skalnivo.com with your email (a one-time link), with Google or with Apple, and choose Open in browser. The tool runs at skalnivo.com/app/. It needs an account, a browser with JavaScript support and a file on your computer that you pick in the file dialogue. Signing in is required only to use the tool.
Does the browser tool save my files?
No. Files are processed locally in the browser tab and are not uploaded to a server. When you close the tab, the measurements are gone, because the tool has no Library or saving. Persistent saving of measurements is available in the mobile app. This also applies to drawings opened from the computer's disk.
How does the browser version differ from the app?
It has no Library, no saving of measurements and no camera scanner; measurements are lost when you close the tab. Scanning means uploading a finished photo and setting the corners by hand. Calibration, the measuring tools and file formats work as in the app, and files stay on the computer.
Updated: