Drawing formats: PDF, DWG, DXF and images

A technical drawing usually reaches you as a PDF, less often as a DWG or DXF, and sometimes only as a photo of a paper plan. Each of these formats behaves differently when you measure: each stores scale, units and detail in its own way. Below is a comparison, along with advice on which file to ask for.

What you get from the designer

PDF is a digital sheet of the drawing: it holds lines, text and dimensions as they were printed. DWG is the working file of CAD programs, with layers, blocks and geometry in drawing units. DXF is an exchange format for the same data, which programs from different vendors can open. A photo or scan turns up when the plan exists only on paper.

Skalnivo opens all of these formats read-only. Measurements and calibrations are saved in a separate overlay, and the source file stays unchanged.

Comparing formats for measuring

Comparison of formats for measuring on a drawing
FormatWhat it containsScale and unitsTypical problem when measuringIn Skalnivo
Vector PDFLines, curves and text as vectorsThe page size is in points (1/72 in); the file does not store the drawing scaleA printout or export at a different scale from the one written on the sheetYes, including multi-page; calibration separately for each page
PDF from a scanAn image (raster) stored as a PDF pageAs above; also depends on the scan resolutionScan distortion, no sharp lines when zoomed inYes, treated as an image; calibration is mandatory
DWG2D and 3D geometry, layers, blocks, dimensionsDrawing units in the header, if they were recordedFile version, missing fonts, external references, a drawing that exists only in a layoutYes: versions R14 to R2018, model space only
DXFThe same as DWG in an exchange format (text or binary)As in DWGAs in DWG; a text file can be largeYes: versions R12 to R2018
JPG, PNG, WebPA raster image with no scale informationNone; calibration sets the scaleResolution, compression, photo perspectiveYes; EXIF orientation is taken into account
Paper (photo, scan)A flat sheet photographed with a cameraNone; calibration sets the scale after perspective correctionA wavy sheet, shadows, a wide-angle lensThe Scan function: corner detection and perspective correction
Comparison of formats for measuring on a drawing

Which file to ask for

  • You want to check a dimension in everyday work: a vector PDF with labelled dimensions is enough. One labelled segment lets you calibrate the whole sheet.
  • The PDF lacks the dimension you need: ask for a DWG or DXF. In a CAD file the coordinates are stored in drawing units, so reading does not depend on a printout.
  • The drawing may have been rescaled: ask for a PDF at the original sheet size (for example A1 without the “fit to page” option), or note which sheet size the designer uses.
  • You only have paper: take a photo with the Scan function and calibrate on a labelled dimension. See scanning a paper plan.

What Skalnivo does not do with files

  • It does not edit, save or convert drawings. If you need a PDF from a DWG file, ask the designer for an export.
  • It shows only a flat (2D) drawing. For DWG and DXF that means model space seen from above.
  • It does not read dimension labels automatically. You enter the value of the known dimension yourself during calibration.
  • It does not judge whether a drawing is correct. The result depends on the quality of the drawing and on where the points are placed; see accuracy and methodology.

Frequently asked questions

Which format is best for measuring?
For a quick check of a dimension, a vector PDF with labelled dimensions is enough. When the dimension you need is missing, DWG or DXF give the most, because they store coordinates in drawing units. Images and photos are the least accurate, since they carry no scale information and may be distorted.
Does Skalnivo convert files between formats?
No. Skalnivo opens files read-only and neither converts anything nor writes to the source file. Measurements and calibrations are kept in a separate overlay on the device. If you need a different format, ask the author of the drawing to export it from the program in which it was made.
How large a file can I open?
The import limit in the app is 400 MB per file. Very large DWG drawings and dense bitmaps may take longer to open; DWG files above 10 MB were not checked on a dedicated sample. If a file does not open correctly, the app shows a message giving the reason.

Updated:

Download

Skalnivo for Android and iOS

Free in version 1.0, no ads, no need to create an account.

Get it on Google PlayApp Store – coming soonApp Store – coming soon

Android and iOS · phones and tablets