Steps
Scanning a drawing on the Scan screen
Step 1: Choose Scan
On the bottom bar, tap Scan. You will see a note that the scanner is only for flat 2D drawings.
Step 2: Start the scanner
Tap Start scanner and allow the app to use the camera. The permission is needed only for scanning.
Step 3: Take the photo
Lay the sheet flat, fit all the corners in the frame, make sure the light is even and take the photo.
Step 4: Set the corners
Drag the four corners onto the corners of the sheet if the detection is off.
Step 5: Choose a mode
Choose colour or black-and-white mode and rotate the image if needed. You can compare it with the original.
Step 6: Save and calibrate
Save the scan, then choose Tools, Calibration and pick a labelled dimension.
Notes
- The camera is used only on the scanner screen and is released when you leave it.
- In the browser tool you upload a finished photo instead of using the camera, and set the corners by hand.
- Tips on taking the photo: Scanning a paper plan.
Related pages
Updated: