Your first calibration: how to set a drawing scale

Calibration tells the app what a known length on the drawing is worth. From then on, every distance on that page is calculated proportionally. Calibration is set separately for each PDF page or scan, and on a sheet with several scales also for each view (area).

Before you start

  • Open a document. The Tools button appears only once a document is loaded.
  • Find a segment with a labelled dimension. Ideally it is long and straight, with the value clearly written.

Steps

Two-point calibration in Skalnivo

  1. Step 1: Open the Tools panel

    Tap the central Tools button on the bottom bar. When a drawing has no scale, the app also shows a No scale yet hint with a Calibrate button.

  2. Step 2: Choose Calibration

    In the panel, tap Calibration.

  3. Step 3: Choose the range

    By default you calibrate the Whole page. When a sheet holds views at different scales (for example details), choose Region (view at another scale) and tap two opposite corners of the view. The advanced option Separate X/Y axes is for scans stretched along one axis.

  4. Step 4: Pick points A and B

    Tap the ends of a segment of known length. Hold your finger to use the magnifier, or hold a point and drag it; the step buttons move the point by 1 dp. Correct and Next let you check the line before you enter the value.

  5. Step 5: Enter the value and unit

    Enter a positive length (for example 4.00 m) and choose a unit: mm, cm, m, km, in or ft.

  6. Step 6: Check the status

    The app shows the message Calibrated, and the page status changes from Not calibrated to Calibrated. When the page units are known, it also shows the Resulting scale 1:N. It applies to a print at the PDF page size; the scale in the title block may be outdated.

  7. Step 7: Check with a 2nd dimension

    Tap Check with a 2nd dimension and place another labelled dimension. The app shows the deviation as a percentage; above 1% the page status changes to Needs checking, because the cause may be a rounded label or another scale in that view.

Tips

  • The longer the calibration segment, the smaller the relative error.
  • The app rejects zero, negative values and points placed too close together.
  • Changing page does not carry the scale over unless you decide so; use the Apply to selected pages button to apply it to other pages.
  • In the Page calibrations list you can Recalibrate, Add area calibration, Restore previous version or Remove calibration.
  • When a measurement enters an area with a different calibration, the app warns you and lets you choose the calibration in Calibration used.
  • In DWG and DXF files with recorded units the scale is set automatically (Calibrated from CAD units) and dimensions can be read without manual calibration.

Updated: