How to measure room area and perimeter from a floor plan

The Area tool calculates the area of a closed polygon, and Perimeter the sum of its sides. Circle gives the diameter, radius, circumference and area. The page must be calibrated.

Steps

Measuring room area and perimeter in Skalnivo

  1. Step 1: Calibrate the floor plan

    Make sure the page has the status Calibrated. Use a long, labelled dimension.

  2. Step 2: Choose Area

    Tap Tools, then Area. For just the sum of the sides, choose Perimeter; for a circle, Circle.

  3. Step 3: Outline the room

    Place points at successive inner corners of the walls. Three points are enough, and the shape may be concave (for example an L).

  4. Step 4: Close the polygon

    Tap the first point or Done. The app shows the area, and with the Perimeter tool also the perimeter.

  5. Step 5: Check for warnings

    If sides cross each other, the app warns you and does not give a misleading area. Fix the order of the points.

  6. Step 6: Compare with the label

    If the floor plan states the room area, compare it with the result and judge the deviation.

Notes

  • The result is the area inside the outline you pick; the rules for calculating usable floor area (standards) are a separate matter, covered in the guide Room area from a floor plan.
  • Areas are given in mm², cm², m² and ft².
  • A circle can be defined in the Centre + radius mode or with 3 points; with different X and Y scales it is drawn as an ellipse.

Updated: